Dual-Meter Flow and Volume Testing: At the heart of our inspection process are the NSF Certified Total Gallon Water Meter and the NSF Certified GPM (Gallons Per Minute) Flow Meter. This dual-meter setup enables inspectors to accurately measure the well’s water output, verifying both the volume and flow rate directly on site. This dual confirmation ensures precise monitoring of the well’s performance.

Pressure System Analysis with NSF Certified Air Gauge: An essential component of any well system is the pressure tank. To maintain the optimal performance of this element, we utilize an NSF Certified Air Gauge to check the well pressure tank’s air pre-charge. This step is vital for ensuring that the water pressure remains stable and consistently meets household needs without causing undue stress on the system.

Static Water Level Measurement with Sonic Water Level Meter: By utilizing sound waves, this innovative device calculates the distance from the top of the well to the water’s surface. One of the primary advantages of employing a sonic meter is its non-intrusive method of measurement. Unlike traditional techniques that involve lowering equipment into the well, potentially introducing contaminants or necessitating cleanup, the sonic water level meter operates entirely from the well’s exterior.

Comprehensive Visual Inspection: Beyond the technical metrics, our approach also involves a thorough visual assessment of the well system. This includes a detailed examination of the wellhead, sanitary cap, pressure tank, wiring, filtration equipment, and above-ground pumping components. Such a meticulous inspection helps identify potential issues that might not be immediately apparent through performance metrics alone, such as signs of corrosion, damage, or wear that could compromise the system’s integrity over time.

(Optional) Available Water Quality Testing and Contaminant Screening: The purity of the water is paramount. Building Supporters recommends and facilitates an water quality test to screen for a wide array of potential contaminants, including bacteria, heavy metals, and chemical pollutants. This rigorous testing ensures that the water meets health standards and is safe for consumption, cooking, and other household uses.

Our high-performance well inspection service offers a comprehensive evaluation to identify potential system failures, which could save you from the inconvenience and expense of major repairs:

Prevent Plumbing Anomalies: Sputtering faucets may indicate air intrusion due to fluctuating water levels, signaling the need for well inspection to identify and rectify potential causes such as a declining water table or a malfunctioning pump system before they escalate.

Ensure Well Integrity: Knowledge about the age and current condition of your well is crucial. Regular inspections can detect if an older well falls short of modern standards or if its structural integrity is compromised, guiding necessary upgrades or maintenance.

Safeguard Water Quality: Testing water for contaminants, sediments, or particles is pivotal. Early detection through systematic inspection can avert health risks, ensuring your water remains clean and safe for consumption.

Optimize Pump Performance: Recognizing issues that cause the well pump to operate more frequently, possibly reflected in higher electricity bills, is vital. Identifying and solving these problems can enhance pump efficiency, reducing energy consumption and operational costs.

Determine Water Supply: Addressing a slowing well recovery rate promptly can circumvent potential water shortages. Inspections can identify whether sediment accumulation is affecting the pump and well structure, allowing for timely interventions to maintain a consistent and reliable water supply.

No waiting. In-field, SAME day testing results.

We utilize calibrated and highly specialized sensors: Laboratory-grade US Environmental Protection Agency (EPA) approved method (Method 1001, Rev. 1.1.) utilizing Anodic Stripping Voltammetry (ASV) measurement for rapidly identifying lead contamination. This process is comparable to laboratory techniques such as ICP-MS and atomic absorption.

We test for:

• Lead
• Nitrate
• Nitrite
• Cadmium
• Copper
• Arsenic
• Total Hardness
• Free Chlorine
• Iron
• MPS
• Total Chlorine
• Fluoride
• Cyanuric Acid
• Chlorine Dioxide
• QAC
• Total Alkalinity
• Carbonate
• pH

Laboratory, testing results in under 96-hours.

Building Supporters can take samples from any location within the home; samples are typically taken from the kitchen sink.

Testing exceeds local and state water quality standards and those set by the EPA, as presented in the National Primary Drinking Water regulations in 40 CFR 141 and 142. Complies with requirements of government based lenders (VA, FHA).

Well Water: We test for properties: Alkalinity (as CaCO3) Hardness Total Dissolved Solids pH Inorganics: Boron Chloride Fluoride Nitrate (as N) Phosphorus Sulfate Metals: Aluminum Antimony Arsenic Barium Beryllium Cadmium Chromium (Total) Cobalt Copper Iron Lead Lithium Manganese Mercury Molybdenum Nickel Selenium Silver Strontium Thallium Tin Titanium Uranium Vanadium Zinc Minerals: Calcium Magnesium Potassium Sodium Calculated Parameter: Bicarbonate CSMR Carbonate Grains per gallon Hardness (Ca,Mg) Hardness (Total) Langelier Saturation Index Sodium Adsorption Ratio Self Tests: Free Chlorine Total Chlorine

Stand alone well inspection:
$999. (Optional +$199 in-field water testing or +$299 laboratory)

Book Now

With any high-performance comprehensive inspection service:
$199. (A $800 savings) (Optional +$199 in-field water testing or +$299 laboratory)

Book Now